Equipment for cleaning injector Triumph S6

(1 customer review)

2 570.00 $



Equipment for cleaning injector Triumph S6 works on the principle of hydrodynamic cavitation

The equipment for cleaning injector Triumph S6 works on the principle of hydrodynamic cavitation. How it works? Let’s figure it out:Equipment for cleaning injector

  • The injector needle in a fluid stream moves at high speed. It has many bulges on its surface. Behind them, a vacuum is formed during the movement;
  • As a result of environmental pressure, the vacuum is divided into a huge number of microscopic bubbles;
  • Bubbles collapse, forming microexplosions. Their energy also eliminates varnish deposits that impede the full operation of the injector.

Advantages of injector cleaning equipment

The result of the removal of varnish deposits from the working area of the nozzle by the method of hydrodynamic cavitation
  1. The cavitation zone is formed directly in the injector channel, due to which the nozzle, fuel channel and valve needle are cleaned. As a result, maximum efficiency is achieved in removing varnish deposits from the workspace of the part.
  2. Injectors made of ceramic or teflon can be cleaned. The phenomenon of hydrodynamic cavitation interacts much more carefully with the material than the same ultrasonic waves.
  3. Flushing in one step. This greatly speeds up the work and, therefore, increases the profit of the workshop.

All three of these items are not performed by ultrasound equipment.

Functionality Triumph S6

  • Cleaning gasoline injectors: FSI, TSI, GDI, IDE, DISI, ECOBOOST
  • Gasoline injector cleaning: Europe / Japan / America
  • Cleaning gasoline injectors with longitudinal fuel injection / lateral fuel injection / monoinjection
  • Simultaneous measurement of the resistance of a group of injectors
  • Checking the mechanics (quality of the spring)
  • Dynamic check consumption
  • Auto cleaning mode
  • Manual cleaning mode
  • Turbo cleaning mode
  • Short circuit protection
  • Protection against deformation of the needle and seat when closing the injector (anti-shock system)
  • Idle valve cleaning mode
  • Injector leak test
  • Injector cleaning indiscriminately
  • Fluid pressure adjustment
  • Tank pressure indicator
  • Separate flushing fluid reservoir
  • Separate tank under test fluid
  • Electronic control of the hydraulic system
  • Visualization and verification of spray pattern in the inspection chamber, simulation of engine speed;
  • Measuring cylinders with drain system;
  • Filtration of test fluid;
  • Level control and 2-stage filtration of test fluid;
  • Disabling the fuel pump when a minimum level of liquid.


Number of nozzle seats6
Injector resistance1-30 ohms
Cleaning time30 minutes
Mains voltage220 V
Tank for cleaning fluid170 ml
Test fluid reservoir4000 ml
Cleaning fluid consumption80-150 ml
Pressure in modes0-5 at.
Dimensions440х440х600 mm
The weight38 kg
Guarantee24 months



By clicking on this link you will find a description of the modified version of the stand – the Triumph Diesel model.

Here you can visit our page in the FB.

1 review for Equipment for cleaning injector Triumph S6

  1. Ramiz

    Previously used ultrasonic equipment for cleaning injectors. But after I bought the Triumph S6, I realized that ultrasound equipment does not clean anything. Only liquid gives the desired result. In addition, with the Triumph S6, you can clean ceramic parts, which has expanded the capabilities of our auto repair shop.

Add a review

Your email address will not be published. Required fields are marked *